Latest news and updates from MESCO Engineering.

MESCO, a leading provider of electronics development for industrial customers, has further expanded its testing and development capabilities to meet the increasing demands of ...

05.09.2023

MESCO expands test and development capacities

Read article

On 6.7.2023, MESCO invited to a developer meeting focused on technical innovations and fundamentals in the field of Functional Safety. The event was a great success and attrac...

04.09.2023

The MESCO Developer Conference: Insights into Functional Safety and Safety Design Packages

Read article

MESCO develops products with functional safety based on commercially available microcontrollers

01.09.2023

MESCO is authorized partner of ST Microelectronics

Read article

MESCO extends the modular approach in HW/SW development with the evaluation board Ethernet-APL for 10BASE-T1L and 10BASE-T1S with PoDL (Communication Module A3).

15.06.2023

New evaluation board with Ethernet-APL 10Base T1L/S

Read article

MESCO extends the successful "MESCO Safety Design Packages" with a tailored architecture for safe field devices in the process industry.

12.06.2023

New architecture for safe field devices in the process industry

Read article

The Design Package Safe AGV/AMR Monitor for the Functional Safety of Automated Guided Vehicles shortens time-to-market, saves costs and risks, and fulfills specific safety ...

10.05.2023

Functional safety for AGVs, AGVs and AMRs

Read article

Subscribe to our free newsletter and don't miss any invitations, news or product innovations anymore.

09.03.2022

Newsletter subscription

Read article

Modern controllers simplify the programming of robots and motion controllers with smart tooling.

15.02.2022

MESCO implements generic robot interfaces

Read article

Meet MESCO at SPS 2021 in Nuremberg, Hall 5 / Booth 210. Our experts will be on site from 23 to 25.11.2021 and will be happy to advise you.

03.11.2021

MESCO @ SPS Nuremberg

Read article

Our technical presentation on the occasion of the online forum Safety & Security 2021 is now available online.

27.07.2021

VIDEO: Close-the-GAP! Industrial Ethernet in process automation

Read article

Webinar announcement 2nd Online Round Table 2021: Analog Devices, TÜV NORD, MESCO Up-to-date know-how from experts, applicable to projects with functional safety and safety p...

20.07.2021

Online Round Table, 30.09.2021

Read article

The cooperation of OPC Foundation with the Ethernet-APL Consortium will enable Ethernet-APL / OPC UA interfaces in the future.

25.06.2021

Ethernet-APL & OPC Foundation cooperate

Read article

NEW VERSION MESCO launches the latest version of its protocollable protocol software for HART field devices.

15.06.2021

New HART® Slave Stack Version 7.7

Read article

The high-quality Safety & Security Webinar on May 5, 2021 was extremely well attended, with well over a hundred permanently connected listeners.

07.06.2021

Review: Online Round Table TÜV NORD & MESCO

Read article

In process automation, the use of Ethernet communication has hardly been established so far.

20.05.2021

Close the Gap! Process automation goes Ethernet

Read article

In process automation, industrial Ethernet can close the gap to the production plant and safely bridge long distances.

19.05.2021

Close-the-GAP! Industrial Ethernet in process automation

Read article

TÜV NORD and MESCO explain what is changing in IEC61508 in a high-quality online seminar.

13.04.2021

Important standard changes in IEC61508 (Webinar TÜV / MESCO)

Read article

... the video of the Safe Drive Monitor, the MESCO Design Package for Safe Stop Functions

18.03.2021

VIDEO: Implementing safe functions intelligently in drives

Read article

NEW for drive technology Safe Stop Functions! The MESCO Design Package for your safe drive.

08.03.2021

Design Package Safe Drive Monitor

Read article

MESCO's development processes were recertified in December 2020 by TÜV Nord for Functional Safety Management according to IEC61508:2010 E/E/PE.

01.03.2021

Continuously certified development processes

Read article

MESCO expands its service portfolio and design package platform to include Ethernet APL technology.

18.02.2021

New: Ethernet-APL Development Service & Design Package

Read article

Reference designs and software libraries support, simplify and accelerate developments in both secure and non-secure environments.

17.02.2021

VIDEO: STM – Functional Safety developed easier

Read article

The Design Package for Safe Stop Functions In this video, we give you a brief overview of our Safety Design Package Safe Drive Monitor.

23.11.2020

VIDEO: Safe Drive Monitor quickly explained

Read article

Do you still need the right interface for your safety communication?

16.11.2020

MESCO: PROFIsafe Competence Center

Read article

EtherCAT is the powerful Ethernet communication technology for high-performance real-time communication functions and high synchronization accuracy of factory automation.

22.10.2020

EtherCAT/FSoE: MESCO offers new services for industrial communication!

Read article

We have re-focused and intensified our portfolio for development services in the area of process automation since summer 2020.

03.08.2020

Bundled expertise for your process equipment development

Read article

Over 60 listeners were connected to the online seminar. The feedback from the participants was very gratifying and confirming. Many thanks to all participants!

10.06.2020

Behind the Scenes: The Online Knowledge Transfer – Functional Safety Developer Seminar, June 4 + 5, 2020

Read article

With our publications on the subject of Product Life Cycle Management, we aim to provide information on standards and regulations and support SMEs in particular with questions...

26.02.2020

Article series: Functional safety, but how?

Read article

The most important topics at SPS 2019 were Industry 4.0 and digitalization.

30.11.2019

Review: Trade fair sps ipc drives 2019

Read article

The repeat of our developer seminar for functional safety - electronics practice by experts for experts - also met with great interest.

15.11.2019

Review: Developer Seminar for Functional Safety, November 7, 2019, at MESCO in Lörrach

Read article

The BiSS open source interface continues to enjoy great recognition worldwide and a corresponding increase in demand.

30.10.2019

BiSS Association awards 500th license to MESCO

Read article

Part 8: Functional Safety Management according to IEC 61508-1 - a summary.

26.08.2019

Article series: Functional safety, but how? (8)

Read article

Part 7: FSM as part of QM

25.07.2019

Article series: Functional safety, but how? (7)

Read article

In industrial automation, systems and devices must comply with international Functional Safety Standards.

12.07.2019

Review: UK Functional Safety IEC / EN61508 Seminar, July 3, 2019, Birmingham.

Read article

Part 6: The system FMEA in the safety project

25.06.2019

Article series: Functional safety, but how? (6)

Read article

In Germany, SPS is the most important trade fair for automation. In Italy, this format has also gained enormous popularity.

17.06.2019

Review: sps ipc drives Italia, May 28-30, 2019, Parma

Read article

Part 5: FMEA - Failure Mode and Effects Analysis

08.05.2019

Article series: Functional safety, but how? (5)

Read article

Our developer seminar for functional safety - electronics practice by experts for experts - was very successful.

03.05.2019

Review: Functional Safety Developer Seminar, April 10, 2019, MESCO

Read article

Seminar in progress: New Solutions for Functional Safety

13.03.2019

First pictures: Functional Safety Seminar

Read article

Part 4: Safe drive technology based on EN61800-5-2

11.03.2019

Article series: Functional safety, but how? (4)

Read article

Part 3: Toolchain - from requirement to test case

31.01.2019

Article series: Functional safety, but how? (3)

Read article

Many systems and devices in industrial automation must comply with the international functional safety standard (IEC/EN 61508).

28.01.2019

Seminar: New solutions for functional safety

Read article

18.12.2018

Article series: Functional safety, but how? (2)

Part 2: The safe way

Read article

Part 1: Light in the standards jungle

13.12.2018

Series of articles: Functional safety, but how? (1)

Read article

This year, we would like to start by thanking you for the many open and effective dialogues we had the pleasure of holding with you at sps ipc drives 2018!

30.11.2018

Review: Trade fair sps ipc drives 2018

Read article

The number of functionally safe automation products is continuously increasing.

24.10.2018

Getting started with product life cycle management for functional safety components

Read article

On Wednesday evening the Technology Workshop for Drive Technology with PROFINET - PROFIdrive of the PROFIBUS Nutzerorganisation e.V. (PNO) at MESCO in Lörrach ended successfu...

12.10.2018

Review: PNO-Workshop & Microfair bei MESCO

Read article

Explosion protection is of central importance, especially in the chemical and petrochemical industry.

08.10.2018

The introduction to explosion protection

Read article

The demand for functionally safe products is growing continuously.

31.07.2018

The introduction to functional safety

Read article

Success Story

18.07.2018

Success Story: Sensor positioner for on/off valves

MESCO has successfully developed for Kaneko Sangyo Co. Ltd, Silent Technology, an electronic system for the safe control of open/close valves with the function of position fee...

Read article

In the current Markt & Technik (issue 22), the reader learns about the far-reaching possibilities of design packages using the example of the Safe Drive Functions software lib...

21.06.2018

Trade article in Markt & Technik: Design packages shorten development times

Read article

The use of industrial 3D printing offers the possibility to create complex, functional geometries to support fast and agile hardware development.

16.05.2018

Technical paper: 3D printing in hardware development

Read article

Smart girls test MINT. At Girls Day @ MESCO 2018, we had a visit from young ladies who were interested in what they were doing.

27.04.2018

Girls Day @ MESCO 2018

Read article

MESCO presented the library Safe Drive Functions, Safety Design Packages at the Praxisforum Elektrische Antriebstechnik 2018, Würzburg and introduced itself as a partner of "...

10.04.2018

Review: Practical Forum on Electric Drive Technology, Würzburg

Read article

Interested audience and experienced experts met in Essen to exchange information about the integration of the Drive Profile in PROFINET and PROFIsafe.

09.04.2018

Review: Profidrive Workshop Essen

Read article

MESCO Engineering, Inc. has been accredited by PI (PROFIBUS & PROFINET International) as a PROFINET Competence Center (PICC).

15.02.2018

MESCO is PROFINET Competence Center for North America

Read article

MESCO was re-audited and re-certified in November 2017 by TÜV Nord in the area of Functional Safety Management (FSM) according to IEC 61508.

19.12.2017

MESCO again FSM certified

Read article

Thank you very much for the many open and effective discussions we had with you during the sps ipc drives!

14.12.2017

In review: Trade fair sps ipc drives 2017

Read article

In the development of safe drives, the effort required to implement the safety functions is considerable.

10.11.2017

Software library simplifies development of safe drives

Read article

In order to support device manufacturers efficiently in the development of their IO-Link safety masters and devices in the future, MESCO has developed its own IO-Link safety d...

09.10.2017

MESCO develops first IO-Link Safety Development Boards

Read article

MESCO Engineering, Inc. has been accredited by the IO-Link Steering Committee as an IO-Link Competence Center.

26.09.2017

MESCO is IO-Link Competence Center for North America

Read article

Success Story

06.09.2017

Success Story: Development of a new Modbus bus-coupler for ABB

Success Story: MESCO turned the idea of its customer ABB into success. The objective was the development of a new Modbus bus-coupler for the automation platform P13.

Read article

Automation components are becoming increasingly intelligent and require sophisticated communication solutions.

01.09.2017

SMART Communication

Read article

The topic of functional safety is becoming increasingly important, not least due to the ubiquitous trend toward human-robot collaboration.

29.08.2017

Lecture series: Focus on functional safety

Read article

Success Story

25.08.2017

Success Story: Vibration transmitter with HART protocol for Wilcoxon

Success Story: MESCO turned the idea of its customer Wilcoxon Sensing Technologies into success.

Read article

Renesas and MESCO Engineering expand partnership - offering customers benefits in many ways

04.07.2017

Synergy effects for our customers

Read article

Functionally safe products offer a crucial competitive advantage in a growing market in automation technology or process measurement technology.

28.06.2017

Expertise in Functional Safety

Read article

MESCO Engineering presents the new version 7.6 of its HART Slave Stacks

21.06.2017

Shorter development times for field devices communication

Read article

IIoT, security and functional safety were the focus of the one-day seminar at MESCO in Lörrach.

19.05.2017

Review: MESCO Technology Day

Read article

MESCO Design Packages received the ranking BEST OF 2017 in the IT & Software Solutions for the Industry category

12.04.2017

BEST OF 2017: MESCO Design Packages Honored with Industry Award

Read article

Functionally Secure Development – The Safety&Security Forum will be held on 5 and 6 July 2017 in Munich.

11.04.2017

Safety & Security Forum in Munich

Read article

Smart sensors collect data. Automation components are getting more and more networked. Field-level equipment can now provide additional data ...

23.03.2017

MESCO Technology Day: IIoT, Security and Functional Safety

Read article

During the course of this year (2017) MESCO offers a series of lectures on Functional Safety jointly with its partners Renesas and Avnet Silica.

27.02.2017

Review: Functional Safety Seminar No. 1, Olten

Read article

Do you want your drive components to "speak a safe language"? Across different levels - right up to the control level? Very good!

17.02.2017

Drive Technology with PROFINET – PROFIdrive Workshops

Read article

Sensor data and additional information can be transmitted to the cloud with very little effort for preventative maintenance and statistical evaluations purposes.

11.01.2017

Industrial Internet of Things – implemented easily

Read article

PROFINET in drive technology offers advantages such as increased data transmission rates, cross traffic, clock synchronization, ‘shared device’, interaction with safety an...

09.01.2017

PROFIdrive-Workshop (PNO), Neuss

Read article

Lörrach – The seminar "Functional Safety" took place on December 13th 2016 at the headquarters of MESCO Engineering GmbH.

15.12.2016

Functional Safety Seminar at MESCO

Read article

Be faster on the market with expert know-how… Faster time-to-market – short product introduction period – is a key element in the development of drives, sensors, actu...

07.12.2016

Expert know-how makes it all swifter

Read article

Experts at the trade fair in Nuremberg. MESCO Engineering, TÜV NORD and TÜViT made a joint appearance at this year's trade fair SPS IPC Drives in hall 2 at booth 161.

07.12.2016

Impressions of the trade fair SPS IPC Drives 2016

Read article

About: Software Library simplifies the development of safe drives in accordance with IEC 61800-5-2

29.09.2016

Standard module for drives with integrated safety functions

Read article

In Sight: MESCO and Renesas at Functional Safety Seminar in Hannover on September 20th, 2016

16.09.2016

Functional Safety Seminar in Hannover

Read article

At a glance: The Technology Workshop on Drive Technology with PROFINET (Development & Application) provides basic knowledge and a general overview of the topic of drive techno...

11.08.2016

Workshop Drive Technology with PROFINET, October 2016

Read article

Retrospective: From July 6 to 7, 2016, the Forum Safety & Security at the Hilton Airport Munich offered exactly what the new name suggests/

02.08.2016

Review Forum Safety & Security: Old Quality in a New Dress

Read article

In Sight: At AVNET's Functional Safety Seminar we provide an Insight into Functional Safety and requirements for manufacturers in Industrial automation.

15.06.2016

MESCO at Functional Safety Seminar

Read article

MESCO Engineering opens its Swiss branch on 01.08.2015 in Brugg, in the TECHNOPARK Aargau.

15.07.2015

New location for MESCO Engineering AG in Switzerland

Read article

At a glance: PROFINET is the market leader among Industrial Ethernet systems in the automation industry, with 7.6 million nodes installed (as of December 2013).

30.06.2015

PROFINET Technology Workshop

Read article